Customize your Hybride

Your customization choices :

  • Volume:
    • 20L as standard
    • 25L : a 20L with an 8cm higher chimney
    • 30L as standard
    • 30L + 25mm belt with back to your size
    • 40L as standard: with a 25mm belt with back to your size
  • The fabric(s) of the bag and its colour(s) :
    • GRIDSTOP 165g/m2 : reliable and very durable fabric used for a long time now for backpack manufacturing, water resistant but not waterproof.
    • XPAC VX21 205g/m2 : waterproof, rigid.
    • XPAC VX25 270g/m2 : high visibility, waterproof, rigid.
    • XPAC X33HS 268g/m2 : camouflage, waterproof and more abrasion resistant than VX21 and VX25
    • EPL ULTRA 200 and 400 : the best fabrics on the market today. Lightweight: 119g/m2 and 158g/m2, waterproof thanks to a recycled plastic film welded on the inside, very resistant to traction thanks to the UHWPE fibres and very resistant to abrasion with polyester fibres to complete. The seams are taped to maintain all the waterproof properties of the fabric. If you choose these fabrics, the entire body of the bag will be made from them.
  • The number of external pockets on the body of the bag. You can choose between :
    • No pockets at all
    • A single large pocket as on the standard Hybrid30,
    • Two pockets as on the standard Hybrid20,
    • Three pockets: one central pocket and two side pockets as on the standard Hybrid40
    • Note: the fewer pockets there are, the fewer seams there are, and therefore the fewer potential water inlets.
  • The fabric of the pockets :
    • Gridstop 110g/m2 : very resistant to abrasion, not breathable, not elastic
    • Lycra 170g/m2 : very stretchy, have to be avoided if you expect a lot of bushwaking, breathable
    • Net 175g/m2 : maximum breathability, very durable, not elastic
    • Dyneema stretch 230g/m2 :  stretchy but less than lycra, it supports abrasion very well, not very breathable
      Please note: pockets made of non-elastic fabrics have pleats to have the same volume as with stretch fabrics.
  • The configuration of the bottom :
    • An elastic with a tensioner will allow you to hang a foam mattress, we do not recommend putting a shelter, it could get damaged when you put your bag on the ground.
    • Two straps with side release buckle : to fix something “heavy” or to keep it in place.
    • A bottom pocket in Dyneema stretch will allow you to store the day’s food or accessible items without putting your bag down.
    • Bottom pocket and elastic over it: to hang something over the bottom pocket but this makes it difficult to access or reduces its volume.
    • You can also choose not to put anything under the bag
  • The top strap system :
    • No strap
    • A simple strap
    • A “V” strap to compress the bag more
    • A “Y” strap to compress the bag mode and attach large objects to it like bear cannister
  • The reminder strip. This is a strip of fabric that is added under the central pocket (if three pockets) or under all the pockets (if 2 or 1 pocket). It increases the life of the pockets because this is where the bag is most often put. Be careful when you put your bag on and you won’t need this strip.
  • Side compressions :
    • Basic : same as the standard versions, depending on the volume
    • A Z compression (back and forth and back) to hold objects of varying lengths and to compress the bag if you replace it with rope (also possible on request). Only with 3 external pockets.
    • A 10mm strap : to really compress the bag. On the whole width (left side, centre, right side) if 0,1 and 2 outside pockets. On both sides if 3 outside pockets.
    • Two 10mm straps : to really compress the bag. On the whole width (left side, centre, right side) if 0,1 and 2 outside pockets. On both sides if 3 outside pockets.
  • The number of ice axe loop :
    • No loop : there will be anyway two small grosgrain loops at the bottom of the bag that will allow you to attach ice axes and poles with a 2-3mm x 25cm piece of rope.
    • 1 loop and elastic : a strap loop at the bottom of the bag on the right and an elastic at the top of the central pocket.
    • 2 loops and elastics : same as with one but on the left and right
  • The size of the vest strap :
    Measure below the pectorals for men and below the chest for women, at the level of the solar plexus. Measure with a tee shirt and with all your thermal clothing. If you are between sizes because of your clothes, take the one below, if not size up.
    Note : veststrap have a limited range of adjustment. Some long trails can make the hiker lose weight, so you should take this into account as much as possible to ensure that your bag fits until the end.
  • The size of the back if you have chosen a 30L+ belt or 40L. You need to measure between the C7 vertebra and the top of the iliac crest.

All bags come with 2 sternum straps and 4 pockets on the veststrap (2 for bottles and 2 for phone, bars, sunscreen and others).

For more details you can check the standard Hybrids pages where everything is detailed: Hybrid20 Hybrid30 Hybrid40

If you need more information, feel free to contact us and we will discus about your Hybride

CUSTOMIZATION

210,00

Volume

NUMBER OF OUTER POCKETS

LEFT PANEL FABRIC

ONLY IF 3 POCKETS

CENTRAL PANEL FABRIC

RIGHT PANEL FABRIC

ONLY IF 3 POCKETS

CENTRE POCKET FABRIC

SIDE POCKETS FABRIC

ONLY IF 3 POCKETS

REMINDER STRIP

ICEAXE LOOP

TOP STRAP

Adjustable strap on top of the bag to compress it or attach an object

SIDE COMPRESSION

BOTTOM PART

RIGHT/LEFT HANDED

VEST STRAP SIZE

Bust circumference below the pectoral/chest area, over the solar plexus

BACK SIZE

ONLY FOR 30L/40L+ 25MM BELT - From top of iliac crest to C7 vertebra

Subtotal:

Add-ons total:

Total: