LEAD TIME : 14 WEEKS

Customize your Hybride

Your customization choices :

  • Volume:
    • 20L 26x14x69cm
    • 25L 26x14x77cm : a 20L with an 8cm higher chimney
    • 30L 28x17x74cm
    • 30L 28x17x74cm + 25mm belt and back to your size
    • 35L 28x17x82cm + 25mm belt and back to your size : a 30L with an 8cm higher rolltop.
  • The fabric(s) of the bag and its colour(s) :
    • ECOPAK EPX200 216g/m2 : waterproof, abrasion resistant(500cycles), rigid, 100% from recycled polyester.
    • XPAC VX25 270g/m2 : high visibility, abrasion resistant(2000cycles), waterproof, rigid.
    • ULTRA200TX 200g/m2 : waterproof, very resistant to traction ans abrasion thanks to the UHWPE + polyester fibers(4400cycles), polyester face inside to be more durable than a plastic film. If you choose these fabric, the entire body of the bag will be made from it.
    • ULTRA400 158g/m2 : waterproof, very resistant to traction ans abrasion thanks to the UHWPE + polyester fibers. The seams are taped (except the bottom) to maintain the waterproofness of the fabric. If you choose these fabric, the entire body of the bag will be made from it.
  • The number of external pockets on the body of the bag. You can choose between :
    • No pockets at all.
    • A single large pocket from a side to the other.
    • Three pockets: one central pocket and two side pockets.
    • Note: the fewer pockets there are, the fewer seams there are, and therefore the fewer potential water inlets.
  • The fabric of the pockets :
    • Ultra Grid Black/BlackOut/ Avocado/ Dark Chili/ Coyote Brown 135g/m2 : resistant to abrasion, not breathable, not elastic
    • Gridstop Blue 165g/m2 : resistant to abrasion, not breathable, not elastic
    • Net 175g/m2 : maximum breathability,  durable, not elastic
    • Ultra Stretch 186g/m2 :  stretchy but it supports abrasion quite well for a stretch fabric, not very breathable.
      Please note: pockets made of non-elastic fabrics have folds in order to have the same volume as with stretch fabrics.
  • The configuration of the bottom :
    • An elastic with a tensioner will allow you to hang a foam mattress, we do not recommend putting a shelter, it could get damaged when you put your bag on the ground.
    • Two straps with side release buckle : to fix something “heavy” or to keep it in place.
    • A bottom pocket in Dyneema stretch will allow you to store the day’s food or accessible items without putting your bag down.
    • Bottom pocket and elastic over it: to hang something over the bottom pocket but this makes it difficult to access or reduces its volume.
    • You can also choose not to put anything under the bag
  • The top strap system :
    • No strap
    • A simple strap
    • A “Y” strap to compress the pack or/and attach large objects to it like bear cannister
  • The reminder strip. This is a strip of fabric that is added under the central pocket (if three pockets) or under all the pockets (if one or two pockets). It increases the life of the pockets because this is where the bag is most often put. Be careful when you put your bag on and you won’t need this strip.
  • Side compressions :
    • Basic : same as the standard versions, depending on the volume/pockets
    • A Z compression (back and forth and back) to hold objects of varying lengths and to compress the bag if you replace it with rope (also possible on request). Only with three external pockets.
    • One 10mm strap : to really compress the bag. On the whole width (left side, centre, right side) if zero, one and two outside pockets. On both sides if three outside pockets.
    • Two 10mm straps : to really compress the bag. On the whole width (left side, centre, right side) if zero, one and two outside pockets. On both sides if three outside pockets.
  • The number of ice axe loop :
    • No loop : by default there will be two small grosgrain loops at the bottom of the bag that will allow you to attach ice axes and poles with a 2-3mm x 25cm piece of rope.
    • One loop and elastic : a strap loop at the bottom of the bag on the right and an elastic at the top of the central pocket.
    • Two loops and elastics : same as with one but on the left and right
  • The size of the vest strap :
    Measure below the pectorals for men and below the chest for women, at the level of the solar plexus. Measure with a tee shirt and with all your thermal clothing. If you are between sizes, take the one below.
    Note : veststrap have a limited range of adjustment. Some long trails can make the hiker lose weight, so you should take this into account as much as possible to ensure that your bag fits until the end.
  • The torso length if you have chosen a 30L+ or 35L. You need to measure between the C7 vertebra and the top of the iliac crest.

All bags come with two sternum straps and four pockets on the veststrap (two for bottles and two for phone, bars, sunscreen and others).

If you need more information, feel free to contact us and we can chat about your specific Hybride needs.

LEAD TIME : 14 WEEKS

250,00

Volume

Required

NUMBER OF OUTER POCKETS

Required

LEFT PANEL FABRIC

Required

CENTRAL PANEL FABRIC

Required

RIGHT PANEL FABRIC

Required

REMINDER STRIP

CENTRE POCKET FABRIC

Required

SIDE POCKETS FABRIC

Required

ICEAXE LOOP

TOP STRAP

Adjustable strap on top of the bag to compress it or attach something

SIDE COMPRESSION

BOTTOM PART

Required

RIGHT/LEFT HANDED

VEST STRAP SIZE

Required. Bust circumference below the pectoral/chest area, over the solar plexus

TORSO LENGTH

ONLY FOR 30L+ AND 35L - From top of iliac crest to C7 vertebra

ADDITIONAL OPTIONS

NOTE

Subtotal:

Add-ons total:

Total:

LEAD TIME : 14 WEEKS